Polyurethane resins: Protection 553

Aliphatic polyurea resin for the construction of surface coverings both at low and high thickness. From 1 mm to 10 cm in a single coat completely transparent

  • Description

    Product properties

    • High performance in terms of durability
    • Ideal product for casting effects on high-traffic floors
    • Non-yellowing product
    • High transparency even at high thicknesses
    • High scratch resistance - 95 Shore D
    • Ideal for casting incorporations
    • Very high gloss - 95 Gloss (extra glossy)
    • Easy hardening slow-setting product
    • Very high lenticular effect even at low thicknesses
    • It does not fear hot and cold surfaces

    Resin family

    Cold aliphatic polyurea


    Drum of 1.65 and 8.25 kg


    Transparent Glossy


    Each package is specifically labeled and shows the production code that identifies the plant and the production period. The product must be kept cool, away from frost, in the original sealed packaging. In the original sealed packages the stability is guaranteed for a year.

  • Application


    The supports must be clean, dry, stable and free from contamination and detaching substances

    Application on RS Cycles

    Apply two coats of Only 3035 polyurethane primer
    When the primer has completely hardened, apply a minimum thickness of 1 mm in the 553 transparent or colored resin

    Application as protective

    Perform a material compatibility test before proceeding
    Always sand the surface that will accommodate the application of the 553 resin
    Apply a 1 mm thick minimum layer of clear or colored Protectin 553 resin

    1.2 kg / sqm for each mm of thickness

    Drying and drying time: 12 h
    Lower temperature limit during application and drying:
    + 5 ° C for background and ambient air

    Tool cleaning
    Acetone solvent


    Do not apply on wet surfaces or with a residual moisture content greater than 2%
    Attention the product has a strong adhesion power
    For thicknesses greater than 5 mm we recommend having the resin at a temperature of at least 20 ° C

  • Download

    Technical data sheet

Stay up to date.

  • Strada Per Leno 4/A

  • 25025 - Manerbio - BS - Italia

  • Tel: +39 030 9306290

  • Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.